Hey there. Is it possible to instruct the Flic Hub to send IR commands without pushing a button? For example, can I instruct Google Home or my own custom workflow (like Node Red, IFTTT) to tell Flic Hub to turn on my AV Receiver via IR?

@Emil understood. Time to get a multimeter then I guess!

@Emil hi! Thanks for the reply. The cells I've been trying are fresh from the shop, fresh from the packet Duracell batteries. So they should be more than fine for the task.

I had at some point used some cheap no-name ones from Amazon though - could that have permanently damaged the buttons?

I've exhausted my stock of Flic 2 buttons and thought I'd head back to my Flic 1 buttons for some new automations. I'd forgotten that across a set of 5 of them, they all have one of the below 2 issues:

1. put a battery in and the light turns on solid and does not turn off
2. put a battery in, the light turns on, then off, and then responds to a few button presses before not powering up any more

I've not been able to find anything via search, since it all just blurs into queries about the Flic 2.

Is there anything I can do to fix the older buttons? I'm assuming since all of mine are doing this it must be a known problem. I'd much rather spend some effort getting them working than send them to landfill

Hey there. Is it possible to instruct the Flic Hub to send IR commands without pushing a button? For example, can I instruct Google Home or my own custom workflow (like Node Red, IFTTT) to tell Flic Hub to turn on my AV Receiver via IR?