Hi there Stefan.
What you're asking should be fairly simple though may require a bit of work to find out the ID's of everything that you are going to trigger.

What you are going to do is make an Internet Request (usually a POST) to your Domoticz . So the URL to select will be:

http://192.168.0.12:8080

Where 192.168.0.12 will be replaced by the IP address of your NAS. You can find this by looking at the 'connected devices' page on your router. 8080 is the port that Domoticz listens to. If you haven't changed this it should stay the same.

The 'Headers' and 'Body' of the Internet Request will then depend up the authentication that you've set up and the device and command that you want to control.This link API should be useful.

For example: to toggle a switch with an id of 99 you would sent the command in json of:

type=command&param=switchlight&idx=99&switchcmd=Toggle

I'm still learning myself but hope this helps

Hi,

For all who have the same problem as me, i just find a way to connect Ikea Tradfri with Flic. First, make sure that you have all your apps updated. I've uninstalled Flic app and reinstall it. And now Flic app accept my Tradfri accessories.

Hope this help :)

Jonathan

@areader0 Ive found as my button count grows it can be easier to do something like this:

Screen Shot 2020-06-22 at 2.42.22 pm.png

The set each button up to call:
/flic/{room}/{location}/sc
/flic/{room}/{location}/dc
/flic/{room}/{location}/lc

for single, double and long clicks respectively.

Then just wire each node-red http receiver to your MQTT topic of choice.

Cheers

I woud also suggest looking at this thread : https://community.flic.io/topic/17282/flic-hub-http-request

@Emil
Thanks for your replying and advice. I could finally make it happen.

This has been keeping me busy for about three weeks and I was just about to post here. Thank you for the PSA!

And Flic team, maybe point that out in the app.

@poczta I don't have an IR in front of me to confirm, but from my notes this should be the pinout (in order):

Tip - Red - 3.3V Ring - White - RX (IR Wide Receiver) Ring - Green - TX (IR Blaster PWM) Sleeve - Black - GND

However, this will be at your own risk. Let me know if you need further info!

Regards,
Anton

Hi. In the Android app, when you configure an action there is a clock symbol at the top where you can set a delay. This feature is currently not available when using the iOS app.

Bump! The Inability of the LR Hub to see Chromecast Audio groups on my LAN means my flics are pretty useless for controlling audio. Is there a technical reason that this is not the case?

If you want more advanced control over your LIFX devices, I wrote a blog post with a few examples of how to leverage Photons Interactor to do some really nifty stuff, including starting/stopping Tile and Beam animations.

Hi. Could you please send your question to https://flic.io/support?