Flic Home

    Community

    • Login
    • Search
    • Popular
    • Users

    Flic IR pinout

    Flic Hub
    ir blaster pinout
    3
    4
    879
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • poczta
      poczta last edited by

      Re: Flic Hub IR pinout

      Hi there,
      I've accidentaly broken the 2,5mm jack connector to the IR blaster. Can you please state the pinout so I can solder the replacement pin? I'd like to Save myself the trial an error way as there's too many possibilities.

      1 Reply Last reply Reply Quote 0
      • anton
        anton FlicTeam @poczta last edited by

        @poczta I don't have an IR in front of me to confirm, but from my notes this should be the pinout (in order):

        • Tip - Red - 3.3V
        • Ring - White - RX (IR Wide Receiver)
        • Ring - Green - TX (IR Blaster PWM)
        • Sleeve - Black - GND

        However, this will be at your own risk. Let me know if you need further info!

        Regards,
        Anton

        1 Reply Last reply Reply Quote 0
        • poczta
          poczta last edited by poczta

          @Emil said in Flic IR pinout:

          Do you mean on the IR accessory or the hub itself? Do you have the old Hub or the new Hub LR?

          Either the Hub (which color of cable goes to which pin on the connector) or the jack itself (which color f a cable is soldered to which part of a jack).
          Something like this:
          https://images.app.goo.gl/S5agUKtGewr4LYay6

          I've got a new hub.

          I'm not exactly sure how I could help you, would you like a photo of how it should look like?

          Yes, basically which color of flic IR cable goes to which part of jack /connector. There are four cables inside the wire for IR connector: white, black, green and red.

          Could you post a photo of your broken jack?

          The jack itself is stuck in the wall (I tried to push it through the hole to my server room). I want to buy a new 2,5 mm jack and solder it to this wires:
          IMG_20200320_140409.jpg

          anton 1 Reply Last reply Reply Quote 0
          • Emil
            Emil FlicTeam last edited by

            Do you mean on the IR accessory or the hub itself? Do you have the old Hub or the new Hub LR?
            I'm not exactly sure how I could help you, would you like a photo of how it should look like?
            Could you post a photo of your broken jack?

            1 Reply Last reply Reply Quote 0
            • First post
              Last post