@romuald Yes!

Any news in that? We really can‘t use flic in our school wifi without this…

@edufediaz-publi Yes, that's what we do in the Flic app.

@philippe-lux-67 Hi!
Sorry for not getting back, we did have a look at the logs but unfortunately there was nothing we could see that would spark an idea for a potential workaround. We do not have the ability to test or update old versions of our app, so I'm afraid there is not much we can do about this.

@oskar sent support a video.
A new twist can't connect either - brand new out of box. Tried to remove hue bridge, app crashes.

It's broken. Still.

@Emil said in Event Logs?:

@bytheedgeuk We will investigate this. I'll see if we can change to make it possible to omit the value entirely instead of sending an empty bytestring.

I noticed after the latest app update I can get this to work.

Thanks @Emil

Is it possible to set an alarm? I'm looking to set a 6am alarm with one click, a 8am with 2 clicks, and another with a hold. But as far as I can tell the android app does not support a "set" alarm function. The wake up command only lets you dismiss or snooze pre-set alarms.

@Emil unfortunatelly not much better. I tried now with Nexus 5x, and to tell you the truth, things are getting even worse:

Yesterday I set up my old phone: Nexus 5 and my Flic account and my 4 Flics. I set the turquoise to call the gate's number on click and call my wife on double-click. Today I connected the the turquoise Flic to my wife's Meizu phone (it worked after a few restarts of the app and clear data). Note: She uses a different Flic account! I set up that Click calls a phone number (with Hebrew characters in the contact's name in her phone's contact list), Double Click calls ME! Just now I logged in to MY Flic account (the one I used previously in my old Nexus 5) from my new phone (Nexus 5X). I do see my 4 Flics, and there's an icon on each of them teling me that they're locked (makes sense, 3 of them are locked to my old phone, and the turquoise is locked to both to my old phone and my wife's phone) I pressed the flic for 7 seconds and clicked DOWNLOAD (doesn't make sense, the Try again I had in the other phone was more logical to me) BUT when I enter the configuration of the turquoise Flic I was shocked! I saw that Double Click's action is to call ME! This is an enormous BUG, as in all places it was stated that the actions are saved in the phone/account and not "in the flic". How come that when I logged in with my flic account I get the settings of my wife's flic account/phone???? I also saw that the Click action has ???????????? in the name instead of the Hebrew characters....

Look, I am a programmer myself, and I like to help, but I don't feel I am getting much for my money here. The reaction time is way to slow, and doesn't address the problems. The bugs I just posted now... they are so huge, I can't possibly imagine how can it be that you never tried the 1 flic 2 phones, 1 flic 2 accounts scenarios!!!! Or if you never tried them then at least don't write in the forum that it works!

I am seriously considering returning my 4 flics, I paid $110 for them and the time I am investing in debugging and waiting for days to get a response doesn't worth the money. For $25 I can get a Raspberry PI that works and knows a bit more than a flic....

Hi Anton,

I was also looking for the use of Mobilesheets with flic and found this thread.

For me it is a likewise situation, I use MobileSheets on Windows/Surface Pro
How is integration possible?

Regards, Mick

Hi @Emil I wanted to follow up. Is there a capability in the API now to control the Flic LED?

Thanks

@tobi-fp Hi, sorry i cannot. The steps below however should help you somewhat to implement it yourself!

@Emil Ah, that's a shame.

I'm having a similar issue with one of my Lifx lights - I have 28 downlights and I've successfully connected groups of them to several Flics via my hub. Everything worked fine on the first day, then one of the lights stopped responding via the LAN protocol. In the app it appeared in the list as an IP address rather than its name. I tried resetting the light, assigning new ip address and changing the name but no dice. I replaced the light with a spare and successfully got it working with the Flic for that room. The next day, a different light in the same group of lights dropped off the list with the same behaviour. Cloud control works fine. Control of the light works fine via the lifx app, which I assume is working via LAN as it's pretty fast.

At this stage I'm not sure if it's a Lifx issue or a Flic issue - I could replace the light again but at 100 dollary-doos that's an expensive troubleshoot. With 28 lights controlled across nine Flics and a single Hub, is it possible I'm pushing a device count limit?

@macopoulos we released the hub sdk a few years ago. You can find it here: https://flic.io/flic-hub-sdk

@info-6 If something is not working, please send a complete description at https://flic.io/support.

I think I figured this out. My hub was connected to my WiFi AND my LAN. I unplugged the LAN cable from the hub so that it just runs on WiFi and it found yeh speakers straight away.

@kurtangus Hi! This has now been released for the iOS app. Now you can select "Real-time" when adding Keyboard Command to Push trigger to make the key correspond to the actual button down and up event!

Hi,
I noticed that a member of the flic team said they were going to start looking at Tuya / Smart Life integration. Is there any update on this? At the moment I am using web requests to home assistant using the tuya v2 integration, but it would be good to have this natively in flic!
Thanks

@wallacepost You can have both Ethernet cable and Wi-Fi in use at the same time. I'm not an expert on this topic but the result is the same as with any computer supporting both Ethernet cable and Wi-Fi, namely that the kernel will create some routing table and direct traffic through the interface it thinks will work best.

@emil hi there, having the same challenge as all the other posters where new, small Wemo outlets are not registering with flic (using iOS).

I've used the homekit workaround stated in this thread, but this is somewhat limiting - it won't support toggling, so you have to use different flic actions to turn on/off. (and I only have 1 action free in the couple of places I want to use these). Any update on when the iOS update is due?